TCB PIPE IDENTIFICATION PAINT - Tru Custom Blends

June 11, 2016

Pipe Identification paint for both finish and re- cognition.

PROPERTIES & ADVANTAGES – A coating for pipes where a durable finish is required as well as color recognition. Very resistant to heat and moisture. White – Solids by volume = 46.0%. Solids by weight = 66.0%

FINISH – GLOSS

COLOR – FEDERAL SPEC. COLORS OR AS REQUESTED.

SPREADING RATE – 450 sq. ft. per gallon at 1.6 mils dry film thickness.

DRYING TIME @70oF – TO TOUCH – 1 hour.

THINNING – Mineral Spirits.

SURFACE PREPARATION – Surface should be clean, dry and free of loose scaly paint.

APPLICATION – BRUSH, SPRAY, ROLL OR PAINT MITT.

EQUIPMENT CLEANUP – Mineral Spirits

PACKAGING – GALLONS AND 5 GALLON PAILS.

FLASH POINT – lOO◦F MINIMUM



June 11, 2016

G-100 WHITE GLOSS ENAHEL

For machines and equipment in plants and factories. PROPERTIES AND ADVANTAGES – A special formulated…


June 11, 2016

LEAD FREE COPONAL WOOD PRESERVATIVE

A clear penetrating preservative for all types of wood which leaves no build up on…


June 11, 2016

WINDOW FROSTING

A window coating for diffusing light and increasing privacy. PROTERTIES AND ADVANTAGES – A light…


June 11, 2016

FIRE RETARDANT LATEX

To meet fire codes and regulations PROPERTIES & ADVANTAGES – Fire Retardant Latex is specially…


June 11, 2016

WATER DISPERSED ALKYD ENAMEL

For plastic, masonry, metal or wood surfaces either new or previously painted. PROPERTIES & ADVANTAGES…


June 11, 2016

POLY-ALKYD ENAMEL

An excellent floor coating or any surface subject to heavy abrasion. Has a good electrical…


June 11, 2016

SILICONE ALKYD ENAMEL

For exterior or interior surfaces where a long term color and gloss retention is desired….


June 11, 2016

803 QUICK DRY GLOSS

Interior or exterior metal, wood, plaster, masonry such as walls, machines, racks, gondolas, fork trucks,…

© 2018 TC Blends