[column width=”1/1″ last=”true” title=”” title_type=”single” animation=”none” implicit=”true”]
For ferrous metals, under the hood auto parts, machines, material handling equipment, etc., where only a solvent base paint could previously be used.
PROPERTIES & ADVANTAGES – A water reducible alkyd enamel which develops excellent adhesion, is fast drying and has good durability. May be applied over unpainted steel. If a two coat system is desired, TCB Water Dispersed Oxide Primer is recommended although any good metal primer will suffice. May be forced dryed or baked.
FINISH – Gloss – Semi-gloss – Flat
COLOR – As desired.
SPREADING RATE – 350 sq. ft. per gallon at .05 mils dry film thickness.
DRYING TIME (AIR DRY) – To touch – 30 minutes. To handle – 1 hour. Maximum hardnes – 24 to, .48 hours.
THINNING – Water
SURFACE PREPARATION – Surface should be clean, dry and free of any loose scaly paint.
APPLICATION – Spray, dip or brush.
FLASH POINT – NONE
PACKAGING – 1 gallon – 5 gallons – 55 gallon drums
PAINT STABILITY – 6 – 8 Months
CLEVELAND HUMIDITY Q. STEEL TEST – Passes 100 Hours
CROSSHATCH ADHESION TEST – Pass
SALT SPRAY TEST – Passes 100 Hours
WATER IMMERSION TEST– Passes 2 Hour
[/column]