SILICONE ALKYD ENAMEL

For exterior or interior surfaces where a long term color and gloss retention is desired. Such as exterior maintenance, shipboard, bridges, etc.

PROPERTIES & ADVANTAGES – A 30% silicone modified air dry soya alkyd enamel with high durability. Meets federal Specifications TTE-490 and TTE-1593B

FINISH – Gloss

COLORS – As desired (60° Gloss – 75+)

SPREADING RATE – 700 sq. ft. at 1 mil dry film thickness

DRYING TIME – 1-2 hours tack free 4-6 hours dry

VISCOSITY – 60-70″ @ 80°F #4 Ford Cup

THINNING – Mineral Spirits

SURFACE PREPARATION – Surface must be clean, dry, and free of all loose scaly paint. Bare metal should be primed with TCB Metal Protective Primer. Follow with 1 or 2 coats of Silicone Alkyd Enamel as desired. New wood should be primed with TCB House Paint Undercoat.

APPLICATION – Brush – Roller – Spray

EQUIPMENT CLEAN UP – Mineral Spirits

PACKAGING – Gallons – 5 Gallon Pails – 55 Gallon Drums

FLASH POINT – 105° F

GRIND (HEGMAN) – 7