For interior walls or ceilings of plaster, wall board, drywall, concrete, brick, wood and metal, which have been properly sealed or primed.
PROPERTIES & ADVANTAGES – Coloramic Alkyd Flat is a low odor self-sealing velvet flat finish which is very scrub able. One coat will usually cover over previously painted surfaces. It spreads easily and uniformly for even the least experienced painter.
FINISH – Flat – (60 Gloss – 0-5)
COLORS – As desired
SPREADING RATE – 660 sq. ft. at 1 mil dry film thickness
DRYING TIME – 2-4 hours tack free 8-12 hours dry
VISCOSITY – 67 – 75 KU
THINNING – Mineral Spirits
SURFACE PREPATATION – Surface should be clean, dry and free of loose scaly paint. New plaster, drywall or wood should have one coat TCB Pigmented Sealer or TCB Triple Sealer. Bare metal should have 1 coat TCB Metal Protective Primer. Repaint work in good condition, us directions for new work.
APPLICATION – Brush – Roller – Spray
EQUIPMENT CLEAN UP – Mineral Spirits
PACKAGING – Gallons – 5 Gallon Pails – 55 Gallon Drums
FLASH POINT – 105F
GRIND (HEGMAN) – 5-
| COLOR | % TOTAL SOLIDS | % PIGMENT SOLIDS | % VEHICLE SOLIDS | % VOLUME SOLIDS | CONTRAST RATIO |
|---|---|---|---|---|---|
| White | 66.6 | 51 .0 | 1 5 • 6 | 41 .5 | 0.97 |
