CNP 301 SATIN SHEEN ALKYD ENAMEL

For interior plaster, wallboard, drywall, concrete, brick, wood and metal which has been properly primed.

PROPERTIES & ADVANTAGES – An alkyd resin, high hiding, low odor, all-purpose interior finish. It applies easily, covers evenly and dries to an even sheen. Dirt and other stains wash off easily without marring the finish.

FINISH – Satin Sheen (60 Gloss – 15-35)

COLORS – As desired

SPREADING RATE – 700 sq. ft. at 1 mil dry film thickness

DRYING TIME – 2-4 hours tack free 8-12 hours dry

VISCOSITY – 65 – 75 KU

THINNING – Mineral Spirits

SURFACE PREPARATION – Surface should be clean, dry and free of loose scaly paint. Unpainted plaster and wood should have one coat of TCB Pigmented Sealer. Prime bare metal with one coat of TCB Metal Protective Primer. Seal drywall and other porous surfaces with one coat of TCB Triple Sealer. Follow with 1 or 2 coats of CNP 301 Satin Sheen Enamel. Over repaint work, 1 coat is usually sufficient.

APPLICATION – Brush – Roller – Spray

EQUIPMENT CLEAN UP – Mineral Spirits

PACKAGING – Gallons – 5 Gallon Pails – 55 Gallon Drums

FLASH POINT – 105F

GRIND (HEGMAN) – 6+