For interior plaster, wall board, drywall, concrete, brick, wood and metal which has been properly primed.
PROPERTIES & ADVANTAGES – Coloramic Alkyd Semi is an alkyd resin, high hiding, low odor all-purpose interior finish. It applies easily, covers evenly and dries to an even sheen. Dirt and other stains wash off easily without marring finish.
FINISH – Semi-Gloss, – (600 Gloss – 30-50)
COLORS – As desired
SPREADING RATE – 860 sq. ft. at 1 mil dry film thickness
DRYING TIME – 3-4 hour tack free 12-24 hours dry
VISCOSITY – 65 – 75 KU
THINNING – Mineral Spirits (Odorless)
SURFACE PREPARATION – Surface should be clean, dry and free of loose scaly paint. Unpainted plaster and wood should have 1 coat of TCB Pigmented Sealer. Prime bare metal with 1 coat B-B Metal Protective Primer. Seal drywall and other porous surfaces with 1 coat TCB Triple Sealer. Follow with 1 or 2 coated of Coloramic Alkyd Semi. Over repaint work with semi-gloss or gloss enamels, 1 coat is usually sufficient. Repaint work with flat finish should be treated as new work.
APPLICATION – Brush – Roller – Spray
EQUIPMENT CLEAN UP – Mineral Spirits
PACKAGING – Gallons – 5 Gallon Pails – 55 Gallons Drums
FLASH POINT – 105F
GRIND (HEGMAN) – 7-
| COLOR | % TOTAL SOLIDS | % PIGMENT SOLIDS | % VEHICLE SOLIDS | % VOLUME SOLIDS | CONTRAST RATIO |
|---|---|---|---|---|---|
| White | 75.4 | 50.7 | 24.7 | 53.7 | 0.98 |
