ELASTICO

Interior or exterior wood or cement floors, furniture, boats or any surface sUbject to oil, grease or abrasion.

PROPERTIES & ADVAN’I’AGES – A coating, heavily fortified with rubber to withstand abuse, friction, water, oil, grease and many chemicals. Recommended for concrete floors where dampness, moisture, alkaki or a combination of all is too severe for standard floor enamels.

FINISH – Gloss (60° Gloss – 75+)

COLORS – As desired

SPREADING RATE – 720 sq. ft. at 1 mil dry film thickness

DRYING TIME – 30-60 minutes tack free 2-4 hours dry

VISCOSITY – 60-70″ @ 80°F #4 Ford Cup

THINNING – Elastico Reducer

SURFACE PREPARATION – Surface must be clean, dry and free from wax, grease and all loose scaly paint. Unpainted wood or cement floors, reduce Elastico 20% for first coat. Apply second coat within 6 hours at full strength. On previously painted surfaces, apply 1 or 2 coats as desired. Metal surfaces should be primed with a B-B Metal Protective Primer.

APPLICATION – Brush – Roller – Spray. First coat on concrete floors should be brushed.

EQUIPMENT CLEAN UP – Elastico Reducer

PACKAGING – Gallons – 5 Gallon Pails

FLASH POINT – 105° F

GRIND (HEGMAN) – 7